When Registering The Pattern Button - JUKI AMS-221EN-HS3020/7200 Instruction Manual & Parts List

4-2. When registering the pattern button

For a pattern registered to the pattern button, the pocket size can be changed on the basis of the pat-
tern number without changing the pocket size with the memory switch U081. (When the pattern button
is selected, the pocket size set by means of the memory switch U081 is disabled.)
* Refer to the Instruction Manual for AMS-221EN " Ⅱ -2-15. Performing new register of pattern
button" p.46, " Ⅱ -2-16. LCD display section at the time of pattern button selection" p.47, " Ⅱ
-2-17. Performing pattern button No. selection" p.51, " Ⅱ -2-18. Changing contents of pattern
button" p.53 and " Ⅱ -2-19. Copying pattern button" p.54 for how to register the pattern button.
Refer to the following in combination with the description given in the Instruction Manual for AMS-
221EN " Ⅱ -2-18. Changing contents of pattern button" p.53.
<Independent sewing data entry screen>
<Independent sewing screen>
<Pattern button screen>
The pocket size set for each pattern button is displayed.
Pictograph A
A
Every time the button is pressed, the pocket size selection
is changed over as shown below.
A
– 7 –
Pocket size
Standard operation
S size
M size
L size
LL size
(Initial value)