Threading The Machine Head - JUKI LZ-2280B Instruction Manual

11. Threading the machine head
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
1) Turn the handwheel by hand to raise the needle to the highest point.
2) Pass the thread in the order of the numbers as illustrated.
3) Pull out the thread about 10 cm from the needle after passing it through the needle.
❹
❺
❶
❷
❸
– 14 –
LZ-228*B-7 LZ-228*B