Table of Contents
Advertisement
3 Installation and uninstallation
15. Click Register new license.
Enter at least one valid license here so that you can use the Virtual-IO
Manager functions. You can enter several licenses here. For more infor-
mation on the License Manager, see section
page 90
16. Click Exit in the VIOM License Manager dialog box to exit the License
Manager. The dialog box closes.
17. Click Finish to end the installation.
3.2.2 Installing the Virtual-IO Manager using the command line
interface
The Virtual-IO Manager can be installed using the command line interface.
You start the installation via the installation package SV_VIOM.exe which
you will find on the ServerView Suite DVD 1 under ServerView – Virtual-IO
Manager.
The installation parameters like address ranges and VIOM license can be
specified by command line. The following syntax is supported:
SV_VIOM.exe /q [DO_ADDRESS_RANGE_SELECTION=true|false][MAC_
RANGE=<mac_range>][MAC_START="<mac_address_start>"]
[MAC_END="<mac_address_end>"][WWN_RANGE=<wwn_range>][WWN_
START="<wwn_address_start>"][WWN_END="<wwn_address_
68
The licenses are not version bound.
l
Licenses purchased with Virtual-IO Manager versions prior
l
to V2.4 are also still valid. These licenses (v1) contain a
chassis count which is multiplied by 18 to get the assign
count used in licenses (v2) purchased with Virtual-IO Man-
ager V2.4 or later.
"License management" on
ServerView Virtual-IO Manager
Advertisement
Table of Contents
