Connections To The Plasmawall And Dhd Controller; Connecting The Plasmawall To The Dhd Controller - Runco PLASMAWALL XP-50DHD Installation And Operation Manual

Installation
3.4
Connections to the
PlasmaWall and DHD
Controller
Connecting the
PlasmaWall to the DHD
Controller
Proceed as follows to connect the PlasmaWall to the DHD Controller, your video sources,
external controller(s) – if present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
➤
Connect the DHD Controller to the PlasmaWall as shown in Figure 3-4 and described in
the sections that follow.
PlasmaWall
Rear Panel
(XP-65DHD shown here)
SLOT1
Figure 3-4. Connecting the PlasmaWall to the DHD Controller
A B
R AUDIO L
COMPONENT/RGB IN
AV IN
SLOT2
HDMI OUT
22 PlasmaWall XP Series Installation/Operation Manual
P /C /R P /C /B Y/G
R R B B
AUDIO
SLOT3
PC IN
RS-232
Communication
Cable and
Adapter (provided)
SERIAL
Display Control
(RS-232 OUT)