Copying A Mtx Mix To Another Mtx (Mtx1-4) - Roland RSS M-300 Owner's Manual

Copying a MTX mix to another
MTX (MTX1–4)
You can copy the mix from one MTX to another MTX. Use the
COPY MTX MIX popup to perform this operation.
1.
Access the CHANNEL DISPLAY screen for the desired
copy-source MTX.
fig.ScrChDispMtx.eps
2.
Press [F7 (COPY MTX MIX)] to access the COPY MTX MIX
popup.
fig.ScrMtxCopyGuide.eps
1 2
1 Copy-source channel
This indicates the copy-source MTX.
2 Copy-destination channel select button
This indicates the copy-destination MTX.
The function buttons perform the following operations:
[F3 (PASTE)] Executes the copy.
[F8 (CLOSE)] Closes the popup.
3.
Use the copy-destination select button to select the
copy-destination MTX.
4.
Press [F3 (PASTE)].
CopyCHoutonf1.eps
A confirmation message will ask you to confirm the
operation.
5.
Press [F8 (PASTE)] to copy the mix to the MTX you
selected in step 3.
If you press [F7 (CANCEL)], the operation will be cancelled.
AUX, MTX, MAIN operations
67