Roland RSS M-300 Owner's Manual page 177

values:
Parameter Value
AUX switch ON
PAN C
LEVEL -
Inf
Pressing [F7 (CANCEL)] will cancel the operation and close the
popup.
Copying the M-300's mix levels to the
source levels
Here's how you can copy the M-300's mix levels (the levels from
channels to MAIN, AUX, or MTX) to the level of the corresponding
source.
1.
Access the desired M-48 SOURCE LEV/PAN popup.
2.
Press [F3 (COPY MIX LEVEL)].
fig.ScrM48CopyMix_Guide.eps
1
2
The COPY MIX LEVEL popup will appear.
1 Mix level select buttons
These select the mix from which the levels will be copied:
AUX1–8, MTX1–4, or MAIN LCR.
If you select MAIN LCR, the sends from AUX to MAIN will also be
included.
If you select MTX, the send levels from AUX or MAIN to MTX will
also included.
Copy PAN (All center on MONO MIX) button
2
If this is on, the send pan will also be copied.
If you use the mix level select buttons to select a mono mix, the
pan settings will be in the center.
3.
Use the mix level select buttons to select the mix levels
that you want to copy.
If you also want to copy the pan, turn the Copy PAN (All center
on MONO MIX) button on.
dB
Management of the M-48 live personal mixer
4.
Press [F8 (OK)].
fig.ScrM48CopyMix_Conf.eps
A message will ask you to confirm the operation.
In this example, the MAIN L/R mix is being copied.
5.
Press [F8 (COPY)]; the mix levels you selected in step 3
will be copied to the levels of the corresponding sources,
and the popup will close.
Pressing [F7 (CANCEL)] will cancel the operation.
177