Effect Input/Output Settings - Roland RSS M-300 Owner's Manual

Effects

Effect input/output settings

The FX INSERT/SOURCE SELECT popup and the FX DESTINATION
SELECT popup are used to select the input-source and output-
destination for the effect.
Accessing the FX INSERT/SOURCE SELECT
popup
1.
Access the EFFECTS screen.
fig.ScrFXInSelBtn.eps
FX INSERT/SOURCE SELECT popup buttons
2.
Move the cursor to the FX INSERT/SOURCE SELECT popup
button L or R of the desired effect, and press [ENTER].
The FX INSERT/SOURCE SELECT popup will appear.
fig.ScrFXInSelGuide.eps
1 2
1 Current insert-destination/input-source indication
This indicates the current insert-destination channel or the
input-source channel for the effect.
2 Applicable effect indication
This indicates the effect to which the FX INSERT/SOURCE
SELECT popup applies.
3 Insert-destination/input-source select buttons
Here you can select the insert-destination channel or the
input-source channel for the effect.
100
The function buttons have the following operations:
[F1 (CH
[F2 (BUS INSERT)]
[F3 (AUX OUT)]
[F6 (SELECT NONE)]
[F8 (CLOSE)]
Accessing the FX DESTINATION SELECT
popup
1.
Access the EFFECTS screen.
fig.ScrFXOutSelBtn.eps
3
2.
Move the cursor to the FX DESTINATION SELECT popup
button L or R of the desired effect, and press [ENTER].
The FX DESTINATION SELECT popup will appear.
fig.ScrFXOutSelGuide.eps
1 Output channel select buttons
These select the output-destination channel for the effect.
You can select more than one output-destination channel.
2 Applicable effect indication
This indicates the effect to which the FX DESTINATION
SELECT popup applies.
1–32 INSERT)] Displays CH1–32
channel select buttons.
Displays AUX1–8,
the insert-destination channel select buttons.
Displays AUX1–8
select buttons.
Clears the input-source selection.
Closes the popup.
FX DESTINATION SELECT popup buttons
1 2
as the insert-destination
MTX1–4, and MAIN L/R/C as
as the input-source channel
3