Roland RSS M-300 Owner's Manual page 154

Other settings and functions
Initializing the mixer settings
1.
Access the SYSTEM screen.
fig.ScrSystem.eps
2.
Press [F1 (INIT)].
fig.ScrInitGuide.eps
1
The INITIALIZE popup will appear.
1 Initialize section select buttons
These buttons select the sections to be initialized.
3.
Use the initialize section select buttons to select the
sections that you want to initialize.
You can select the following sections:
MIXER PARAMETER The mixer parameters will be initialized.
SYSTEM SETTING The system settings will be initialized.
SCENE MEMORY The scene memory will be erased.
ALL LIBRARY All user libraries will be initialized.
USER PREFERENCE The user preferences will be initialized.
SYSTEM SETTING includes the following items:
• The M-300's sampling frequency setting
• Panel, and display brightness settings
• REAC settings
• Remote settings
4.
Press [F8 (OK)].
fig.ScrInitConf.eps
A message will ask you to confirm the operation.
154
5.
When you press [F8 (INIT)], the section you selected in
step 3 will be initialized.
If you press [F7 (CANCEL)], the operation will be cancelled.
If you attempt to initialize the scenes or libraries when a
locked scene or library exists, the following caution message
will appear.
fig.ScrInitLockedCaut.eps
If you press [F6 (DON'T INIT)], the locked data will not be
initialized; only the data that was not locked will be
initialized.
If you press [F7 (CANCEL)], the initialization operation will be
cancelled.
If you press [F8 (INIT)], all data (including the locked data) will
be initialized.