M-48 Memory Operations - Roland RSS M-300 Owner's Manual

M-48 memory operations

You manipulate M-48 memory using the M-48 MEMORY popup.
Accessing the M-48 MEMORY popup
1.
Access the M-48 MANAGER popup.
fig.ScrM48Manager.eps
2.
In the M-48 list, move the cursor to the desired M-48
MEMORY NO., and press [ENTER].
The M-48 MEMORY popup will appear.
There are two views: the SELECTED UNIT tab and the ALL
UNITS tab.
• SELECTED UNIT tab
fig.ScrM48Memory.eps
In this tab you can manipulate the memories of the M-48
unit that is selected in the M-48 list.
• ALL UNITS tab
fig.ScrM48MemoryAll.eps
In this tab you can manipulate the memories of all M-48
units (except for units whose MEMORY SAFE function is on).
Management of the M-48 live personal mixer
fig.ScrM48Memory_Guide.eps
1 Target unit indication
This indicates the M-48 that is the target of memory
operations.
2 Memory list
This lists the memories of the target M-48 unit. The current
memory number is shown in green.
The list shows the following items:
Item Explanation
NO. Indicates the memory number.
NAME Indicates the memory name.
* This is not shown in the ALL UNITS tab.
The function buttons have the following operations:
[F1 (SELECTED UNIT)]
[F2 (ALL UNITS)]
*1 *2
[F3 (NAME EDIT)]
*2
[F4 (RECALL)]
* 2
[F5 (STORE)]
*2
[F6 (CLEAR)]
[F7 (MEMORY SAFE)]
[F8 (CLOSE)]
*1 Not shown in the ALL UNITS tab.
*2 Not available if [F7 (MEMORY SAFE)] is on.
1 2
*
Shows the SELECTED UNIT tab.
Shows the ALL UNITS tab.
Accesses the NAME EDIT popup where you can
edit the memory name.
Recalls the memory number selected in the list
(p. 184).
Accesses the M-48 MEMORY STORE popup,
where you can store to the memory number
selected in the list (p. 184).
Returns the contents of the memory selected in
the list to the default state (p. 184).
*1
Turns MEMORY SAFE on/off for the target M-48
unit.
Closes the popup.
183