Switching In The Pgm/Pst Mode; Changing The Mix Pattern; Changing The Wipe Pattern - Roland VR-6HD Reference Manual

Video Operations

Switching in the PGM/PST Mode

Here are the steps when selecting "PGM/PST mode" in the operation
mode settings.
1 .
Press the [MIX] or [WIPE] button to select the transition
effect.
2 .
Press the MODE [INPUT SELECT] button.
3 .
Press a VIDEO SWITCHER [1]–[6] button to select the preview
output video (the video to be output next).
You can check the preview output video in the PVW section of the
multi-view.
Lit Green: preview output video (the video to be
output next)
MEMO
You can also directly touch the MULTI-VIEW or STILL-VIEW screens
to select a video signal.
4 .
Press the [CUT] or [AUTO] button.
Button to operate Action taken when pressed
[CUT] button
The video switches instantly.
(lit up red)
A switch (transition) effect is applied, and the
video switches automatically.
[AUTO] button Set the video transition time from the [MENU]
(blink red) button
[MENU] button
"TIME".
MEMO
You can change the transition pattern by which the mix/wipe occurs.
Ø
"Changing the Mix Pattern" (p. 20)
Ø
"Changing the Wipe Pattern" (p. 20)
20
Ó Ó Ó
"TRANSITION" "MIX" "MIX" or
Ó Ó
"TRANSITION" "WIPE"

Changing the Mix Pattern

You can change the transition pattern used for a mix transition.
1 .
While the [MIX] button is lit, select "MIX" from the [MENU]
Ó
button "TRANSITION"
The setup screen appears.
2 .
Touch the screen to access the settings.
Menu item
TYPE
TIME
* For details on the parameter, refer to "3: TRANSITION" (p. 122).
3 .
Press the [MENU] button to close the screen.

Changing the Wipe Pattern

You can change the wipe transition pattern, wipe direction and other
properties.
1 .
While the [MIX] button is lit, select "WIPE" from the [MENU]
Ó
button "TRANSITION"
The setup screen appears.
2 .
Touch the screen to access the settings.
Menu item
TYPE
TIME
DIRECTION
BORDER COLOR
BORDER WIDTH
* For details on the parameter, refer to "3: TRANSITION" (p. 122).
3 .
Press the [MENU] button to close the screen.
Ó
Ó
and press the [VALUE] knob.
Explanation
Specifies the transition pattern for mix.
Specifies how long the transition takes.
Ó
and press the [VALUE] knob.
Explanation
Specifies the transition pattern for wipe.
Specifies how long the transition takes.
Specifies the direction of wipe.
Specifies the color of the border added to
the edge of the wipe area.
Specifies the width of the border added to
the edge of the wipe area.