Roland RSS M-300 Owner's Manual page 83

Setting the 8-band EQ to a flat state
1.
Access the 8-BAND EQ popup.
fig.Pop_8BandEQ.eps
2.
Press [F6 (FLAT)].
fig.ScrEQFlatConf.eps
A confirmation message will ask you to confirm the
operation.
3.
Press [F8 (FLAT)]; the gain of each band will be set to 0.0
dB.
If you press [F7 (CANCEL)], the operation will be cancelled.
Using the 8-band EQ library
You can recall 8-band EQ settings from the library, or store the
current 8-band EQ settings to the library.
The 8-BAND EQ LIBRARY popup is used to perform 8-band EQ
library operations.
1.
Access the 8-BAND EQ popup.
fig.Pop_8BandEQ.eps
4-band EQ/8-band EQ
2.
Press [F4 (LIBRARY)] to access the 8-BAND EQ LIBRARY
popup.
fig.Pop_8BandEQLibGuide.eps
1 2
1 Channel indication
This indicates the channel to which the 8-BAND EQ LIBRARY
popup applies.
2 Library data list
This is a list of the library data.
The function buttons have the following operations:
[F2 (PREVIEW)] Previews (auditions) the selected library data.
[F3 (NAME EDIT)] Accesses the NAME EDIT popup.
[F4 (RECALL)] Recalls the selected library data.
[F5 (STORE)] Stores the current settings into the selected
library data.
[F6 (CLEAR)] Clears the selected library data.
[F7 (LOCK)] Locks/unlocks the selected library data.
[F8 (CLOSE)] Closes the popup.
For details on library operations, refer to "Library operations" (p.
37).
Noise may occur when you preview or recall a library item,
but this is not a malfunction.
83