Channel Strip - Roland RSS M-300 Owner's Manual

Appendix

Channel strip

CH STRIP x2 (Channel Strip x2)
fig.AlgoDualChStrip.eps
Input A
Enhancer/
4 Band EQ
De-esser
Input B
Enhancer/
4 Band EQ
De-esser
This is a dual-mono channel strip. It provides enhancer/de-esser,
EQ, and delay.
ENHANCER/DE-ESSER A/B
ENHANCER/DE-ESSER SW
(Enhancer/De-esser switch)
Turns the enhancer/de-esser on/off
Value: OFF, ON
MODE (Gate mode)
Value
ENHANCER: Enhances the harmonic content of the
sound, giving the sound greater clarity. If
the high-frequency region is weak, it will be
strengthened. The DE-ESSER threshold
setting is not used
DE-ESSER: Restrains the sibilants, softening the sound.
If the high-frequency region is excessive, it
will be moderated. The ENHANCER
sensitivity and ENHANCER mix level are not
used.
SENS (Enhancer sensitivity)
Enhancer sensitivity
Value: 0–100
FREQ (Frequency)
Frequency above which is handled as the high-frequency
region
Value: 200 Hz–20.0 kHz
MIX (Enhancer mix)
Enhancer mix level
Value: 0.0–12.0 dB
THRE (De-esser threshold)
Threshold level for the de-esser
Value: -36.0–0.0 dB
210
EQ A/B
EQ SW (EQ switch)
Turns the EQ on/off
Output A
Value:
Delay
Output B
EQ ATT (EQ attenuator)
Delay
Attenuator for the EQ
Value:
LOW TYPE
Filter type for the Lo band (*1)
Value:
LO GAIN
Gain of the Lo band (*1)
Value:
LO FREQ
Center frequency of the Lo band (*1)
Value:
LO Q
Steepness of the frequency response curve at the Lo band
center frequency (*1)
Value:
LO-MID TYPE
Filter type for the Lo-Mid band (*1)
Value:
LO-MID GAIN
Gain of the Lo-Mid band (*1)
Value:
LO-MID FREQ
Center frequency of the Lo-Mid band (*1)
Value:
LO-MID Q
Steepness of the frequency response curve at the Lo-Mid band
center frequency (*1)
Value:
HI-MID TYPE
Filter type for the Hi-Mid band (*1)
Value:
HI-MID GAIN
Gain of the Hi-Mid band (*1)
Value:
OFF, ON
-42.0–+6.0 dB
PEAK, LSV, HSV, LPF1, HPF1, LPF2, HPF2,
BPF, BEF, THRU
-15.0–+15.0 dB
20 Hz–20.00 kHz
0.36–16.00
PEAK, LSV, HSV, LPF1, HPF1, LPF2, HPF2,
BPF, BEF, THRU
-15.0–+15.0 dB
20 Hz–20.00 kHz
0.36–16.00
PEAK, LSV, HSV, LPF1, HPF1, LPF2, HPF2,
BPF, BEF, THRU
-15.0–+15.0 dB