Mtx Send Operations - Roland RSS M-300 Owner's Manual

AUX send/MTX send

MTX send operations

The MTX sends are used to send audio signals from AUX1–8 or MAIN L/R/C to MTX1–4.
fig.OutBlkMtxSends.eps
MAIN L, R, C
ATT
AUX 1–8
ATT
The MTX SENDS popup is used to perform MTX send operations.
1.
In the fader module section, press a [SEL] button to select
the desired channel.
Select from AUX1–8 or MAIN
2.
In the AUX/MTX SENDS area of the CHANNEL EDIT
section, press [DISP].
fig.ScrMatrixSends.eps
The MTX SENDS popup will appear.
●
MTX sends 1–4
These adjust the sends from the AUX or MAIN to MTX. The
MTX send area is structured as follows:
fig.PopMtxSendFieldGuide.eps
1 2
1 Number/Name
This indicates the MTX number and name.
86
POST ATT PRE EQ PRE FADER
EXT FX FX
FADER BAL
INSERT INSERT
8-BAND
PEQ
POST ATT PRE EQ PRE FADER
EXT FX FX
FADER BAL
INSERT INSERT
8-BAND
PEQ
L/R/C.
3 4 5
POST FADER OUTPUT
GR
TO MONITOR SEL
MUTE
TO REC SEL
TO MONO MIX
LIMITER
MTX SEND 1–4
PRE EQ
SEND
PRE FADER
POST FADER
SEND
AFL ON
PFL
AFL
POST FADER OUTPUT
GR
TO MONITOR SEL
MUTE
TO REC SEL
TO FX SOURCE SEL
LIMITER
MTX SEND 1–4
PRE EQ
SEND
PRE FADER
POST FADER
SEND
2 Send level bar
This adjusts the send level to MTX in a range of -Inf dB–+10.0
dB.
The color of the send level bar indicates the send point or
the status of the send switch, as follows:
Color of the send
level bar
Blue
Green
Gray
3 ON button
This turns the send switch on/off. The send switch turns the
signal to MTX on/off.
4 Send point select buttons
These select the point from which the AUX or MAIN signal is
sent to MTX, from the following choices:
PRE EQ
PRE FD
POST FD
5 LINK switch
This turns linking of adjacent odd-numbered/even-
numbered MTX on/off. If this is on, the adjacent MTX will be
linked.
POST DELAY
MAIN OUT L
DELAY
MTX
ON
LINK
TO MTX 1, 3
PAN
ON
TO MTX 2, 4
SOLO
TO SOLO
POST DELAY
AUX 1–8 OUT
DELAY
MTX
ON
LINK
TO MTX 1, 3
PAN
ON
TO MTX 2, 4
Status
PRE EQ or PRE FADER send point
POST FADER send point
Send switch is off
Send from the pre-EQ point.
Send from the pre-fader point.
Send from the post-fader point.