Editing Effect Parameters - Roland RSS M-300 Owner's Manual

Effects

Editing effect parameters

The FX EDIT popup is used to edit the effect parameters.
Accessing the FX EDIT popup
1.
Access the EFFECTS screen.
fig.ScrFxRack.eps
2.
According to the FX that you want to use, press
FX1)]–[F4 (EDIT FX4)].
ffig.ScrFxEditGuide.eps
1
The FX EDIT popup will appear.
1 Effect parameter field
In this field you can edit the effect parameters. The contents
of this field will depend on the effect type.
The function buttons have the following operations:
[F1]–[F6] Switch the display in the effect parameter field.
The number of tabs will depend on the effect
type.
[F6 (TEMPO)] Accesses the TEMPO popup. This exists only for
delay-type effects (p. 103).
[F7 (LIBRARY)] Accesses the FX LIBRARY popup (p. 102).
[F8 (CLOSE)] Closes the popup.
You can also make the setting for accessing the popup from a
USER button (p. 136).
102
Editing effect parameters
1.
Access the FX EDIT popup for the desired effect.
fig.ScrFxEdit.eps
2.
Use [F1]–[F6] to switch between tabs to view the
parameters you want to edit.
[F1 (EDIT
3.
Move the cursor to the desired parameter, and use the
value dial to change the value.
4.
Press [F8 (CLOSE)] to close the popup.
Using the effect library
The effect library is used to select the effect type. You can recall
effect settings from the library, and store the current effect
settings in the library.
Effect library operations are performed in the FX LIBRARY popup.
1.
Access the FX EDIT popup for the desired effect.
fig.ScrFxEdit.eps
2.
Press [F7 (LIBRARY)].
fig.ScrFxLibGuide.eps
1
2
The FX LIBRARY popup will appear.
3