Table of Contents
Advertisement
List of Shortcut Keys
Switching Screens and Modes
Operation
To access the quantize edit screen
To access the sound edit screen
To access the UTILITY screen
To access the master clock setting screen
To access the input/output and recording settings
screen
To access the project save screen
To access the MOTION ERASE screen
To switch to LAST STEP mode
To recall SCENE 5
To recall SCENE 6
To recall SCENE 7
To recall SCENE 8
To edit PAD MODE "CLIP"
To edit PAD MODE "NOTE"
To edit PAD MODE "CHORD"
To edit PAD MODE "SCATTER"
To edit the total effect Reverb
To edit the total effect Delay
To edit the total effect Multi-Effect
To edit the total effect Comp/EQ
To access the clip setting screen
To access the clip sequence setting screen
Adjusting the Mix Sound
Operation
To adjust the volume of the sound
To adjust the pan of the sound
To adjust the delay send of the sound
To adjust the reverb send of the sound
MOTION
Operation
To delete a knob's motion
To punch-in motion
Phrase Editing
Operation
To step-record
(Tone track only)
To input Motion in a step
To mute the drum part
(for each clip)
To enter weak drum beats
To clear the phrase from a clip
To clear the phrase from a drum part
To duplicate a phrase
Operation
Hold down the [SHIFT] button and
In the home screen, select the clip for which
you want to make settings, then hold down the
[SHIFT] button and
Operation
Hold down the [SEL] button of the corresponding
track and
Operation
Hold down the MOTION [ON] button and
Hold down the MOTION [REC] button and
Operation
When in Note mode,
Hold down the [CLEAR] button, and
When the CLIP SEQ SETTING screen (p. 50)
displayed,
Press the [QUANTIZE] button.
Press the [SOUND] button.
Press the [KNOB ASSIGN] button.
Press the [TEMPO] button.
Press the [INPUT] button.
Press the [FUNC] button.
Press the MOTION [ON] button.
Press the MOTION [REC] button.
Press the SCENE [1] button.
Press the SCENE [2] button.
Press the SCENE [3] button.
Press the SCENE [4] button.
Press the PAD MODE [CLIP] button.
Press the PAD MODE [NOTE] button.
Press the PAD MODE [CHORD] button.
Press the PAD MODE [SCATTER] button.
Press the [REVERB] button.
Press the [DELAY] button.
Press the [MULTI] button. Select the MFX tab.
Press the [MULTI] button. Select the COMP tab or EQ tab.
Press the [CLIP] button (below the [C2] knob).
Press the MEASURE [<] or [>] button.
Turn the [C1] knob.
Turn the [C2] knob.
Turn the [C3] knob.
Turn the [C4] knob.
Operate the [FILTER] [MOD] [FX] knob of the corresponding track.
Hold down the [REC] button and press the [STEP] button.
Hold down the [STEP] button, and operate the [FILTER] [MOD] [FX] knobs of the
corresponding track.
Hold down the PAD MODE [MUTE] button, and press a pad.
Hold down the pad, and press the [STEP] button.
Press the [SEL] button of the corresponding track.
Press a pad.
Hold down the [FUNC] button and press the MEASURE [>] button.
57
Advertisement
Chapters
Table of Contents
