Roland RSS M-300 Owner's Manual page 174

Management of the M-48 live personal mixer
Returning the preference settings to the
default state
1.
Access the desired M-48 SETUP popup.
fig.ScrM48Setup.eps
2.
Press [F6 (PREF)].
fig.ScrM48Pref.eps
The M-48 PREFERENCES popup will appear.
3.
Press [F7 (RESET)].
fig.ScrM48Pref_Conf.eps
A message will ask you to confirm the operation.
4.
Press [F8 (RESET)] to return the preference settings to
their default state.
Pressing [F7 (CANCEL)] will cancel the operation.
The preference settings will be set to the following values:
Parameter
SOLO MODE
LAYER select clears SOLO
MEMORY Disable RECALL button
Disable STORE button
LINE OUT SOURCE
LPF
MONO
174
Assigning group names for an M-48 unit
1.
Access the desired M-48 SETUP popup.
fig.ScrM48Setup.eps
2.
In the GROUP MIX (VOLUME) area, move the cursor to the
desired group name and press [ENTER].
fig.ScrM48GrpName.eps
The NAME EDIT popup will appear.
3.
Use the name edit field to edit the name.
For details on name editing, refer to "Editing a name" (p. 37).
4.
Press [F8 (OK)] to finalize the edited name and close the
popup.
Pressing [F7 (CANCEL)] will cancel the operation and close
the popup.
Values
ADD ON
No
No
No
MAIN BUS
OFF
OFF