Roland RSS M-300 Owner's Manual page 160

Other settings and functions
Creating a folder
1.
Access the USB MEMORY popup.
fig.ScrSysUSBMem.eps
2.
In the file list, move to the level at which you want to
create a folder.
3.
Press [F2 (MAKE FOLDER)].
fig.ScrMakeFolder.eps
The MAKE FOLDER popup will appear.
4.
Use the name edit field to edit the name.
For details on name editing, refer to "Editing a name" (p. 37).
5.
Press [F8 (OK)] to create the folder and close the popup.
Pressing [F7 (CANCEL)] will cancel the operation and close the
popup.
160
Renaming a file or folder name
1.
Access the USB MEMORY popup.
2.
In the file list, move the cursor to the desired file or
folder.
3.
Press [F3 (NAME EDIT)].
fig.ScrNameEdit.eps
The NAME EDIT popup will appear.
4.
Use the name edit field to edit the name. You can specify
a name of up to twelve characters.
Even if the original name exceeded twelve characters, the name
after editing will not exceed twelve characters.
5.
Press [F8 (OK)] to finalize the name you edited and close
the popup.
If you press [F7 (CANCEL)], the name edit will be cancelled
and the popup will close.
For details on name editing, refer to "Editing a name" (p. 37).