Opening The Faceplate Display And Topology Popup Menus; Topology Data Windows - Qlogic SANbox 5602 User Manual

0
2.11.2.3

Opening the Faceplate Display and Topology Popup Menus

The faceplate display shows the front of a single switch and its ports. To open the
faceplate display when viewing the topology display, click the switch entry/icon in
the fabric tree, or double-click the switch graphic.
The topology display also offers a fabric, switch, and a link popup menu:
To open the fabric popup menu, right-click the graphic window background.
The fabric popup menu presents selections to refresh the fabric, select all
switches, select all links, or layout topology.
To open the switch popup menu, right-click the switch icon in the graphic
window. The switch popup menu presents selections to refresh the switch,
delete the switch from the display, open the Switch Properties dialog, open
the Network Properties dialog, and open the SNMP Properties dialog.
To open the link popup menu, right-click the link. The Link popup menu
presents a selection to delete the link from the display.
2.11.3

Topology Data Windows

The topology display provides the following data windows corresponding to the
data window tabs:
Devices – displays information about devices (hosts and storage targets)
connected to the switch. Refer to
more information.
Active Zoneset – displays the active zone set for the fabric including zones
and their member ports. Refer to
page 3-16
Fabric" on page 3-20
Switch – displays current network and switch configuration data for the
selected switches. Refer to
information.
Link – displays information about the inter-switch links. Refer to
Window" on page 3-17
59097-00 A
for more information about this data window. Refer to
for information about zone sets and zones.
"Switch Data Window" on page 4-8
to for more information.
2 – Using SANsurfer Switch Manager
Using the Topology Display
"Devices Data Window" on page 3-15
"Active Zone Set Data Window" on
for
"Zoning a
for more
"Link Data
2-29