Sansurfer Switch Manager Window - Qlogic SANbox 5602 User Manual

2 – Using SANsurfer Switch Manager
Starting SANsurfer Switch Manager
Click the Open Existing Fabric View File radio button to open the Open
View dialog which prompts you to specify a fabric view file that you saved
earlier. Refer to
Click the Start Application Without Specifying a Fabric radio button to
open the SANsurfer Switch Manager window shown in
Click the Open Configuration Wizard radio button to open the Config
Wizard to configure a switch, add a new switch, replace/restore a switch, or
recover or edit an IP configuration of an existing switch.
Figure 2-2. SANsurfer Switch Manager Window
2-10
"Opening a Fabric View File" on page
0
3-6.
Figure 2-2.
59097-00 A