Qlogic SANbox 5602 User Manual page 97

0
MAC Address
IP Address
Subnet Mask
Gateway
SNMP Enabled
Negotiated Domain ID
Configured Domain ID
Domain ID Lock
Number of Ports
Switch Type
Operational State
Administrative State
Configured Admin State
R_A_TOV
E_D_TOV
Interop Mode
Legacy Address Format
Interop
Zoning Default Visibility
Security Auto Save
59097-00 A
Table 4-2. Switch Data Window Entries (Continued)
Entry
Media Access Control address
Internet Protocol address
Mask that determines the IP address subnet
Gateway address
SNMP enabled or disabled.
The domain ID currently being used by the fabric
The domain ID defined by network administrator
Domain ID lock status. Prevents (True) or permits (False)
dynamic domain ID reassignment.
Number of ports activated on the switch.
Switch model
Switch operational state: Online, Offline, Diagnostic
Current switch administrative state
Switch administrative state that is stored in the switch
configuration
Resource allocation timeout value
Error detect timeout value
Zoning merge status. If True, changes to the active zone
set are propagated throughout the fabric. If false, changes
to both the active zone set and zoning database are
propagated throughout the fabric. Refer to the QLogic
Switch Interoperability Guide found on the QLogic Web
site.
Legacy port addressing status. Enabled only for
interoperability with non-FC-SW-2 compliant switches.
Zoning auto save status. Saves zoning updates in
Auto Save
temporary memory and the zoning database (True) or
only in temporary memory (False).
Zoning visibility status. Permits (All) or prevents (None)
communication between attached devices in the absence
of an active zone set.
N/A - does not apply to this switch
4 – Managing Switches
Displaying Switch Information
Description
4-9