Opening The Faceplate And Topology Display Popup Menus; Topology Data Windows; Using The Faceplate Display - Qlogic SANbox 5200 Series User Manual

2 – Using SANsurfer Switch Manager

Using the Faceplate Display

2.12.2.3

Opening the Faceplate and Topology Display Popup Menus

The topology display shows all switches that are able to communicate and all
connections between switches. The faceplate display shows the front of a single
switch and its ports. Menu options vary with each type of popup menu.
To open the fabric popup menu in the topology display, right-click the graphic
window background.
To open the switch popup menu in the topology display, right-click the switch
icon in the graphic window.
To open the link popup menu in the topology display, right-click the link.
To open the switch popup menu in the faceplate display, right-click the
faceplate in the graphic window.
2.12.3

Topology Data Windows

The topology display provides the following data windows corresponding to the
data window tabs:
Devices – displays information about devices (hosts and storage targets)
connected to the switch. Refer to
more information.
Active Zoneset – displays the active zone set for the fabric including zones
and their member ports. Refer to
page 3-34
Fabric" on page 3-38
Switch – displays current network and switch configuration data for the
selected switches. Refer to
information.
Link – displays information about the inter-switch links. Refer to
Window" on page 3-35
2.13
Using the Faceplate Display
The faceplate display shown in
operational state, and port status. Consider the following functional elements of
the faceplate display:
Port Views and Status
Working with Ports
Faceplate Data Windows
2-26
for more information about this data window. Refer to
for information about zone sets and zones.
"Switch Data Window" on page 4-8
to for more information.
Figure 2-11
"Devices Data Window" on page 3-33
"Active Zone Set Data Window" on
displays the switch name and
A
for
"Zoning a
for more
"Link Data
59056-03 C