Displaying Fabric Information - Qlogic SANbox 5602 User Manual

0
4. Restore the configuration from the failed switch to the replacement switch:
a.
b.
c.
d.
5. Reset the replacement switch to activate the configuration formerly
possessed by the failed switch including the domain ID and the zoning
database. Open the Switch menu and select Reset Switch.
6. Reconnect the inter-switch links, target devices, and initiator devices to the
replacement switch using the same ports as were used on the failed switch.
3.4

Displaying Fabric Information

The topology display is your primary tool for monitoring a fabric. The graphic
window of the topology display provides status information for switches,
inter-switch links, and the Ethernet connection to the management workstation.
The data window tabs show device, switch, and active zone set information. The
Active Zoneset tab shows the zone definitions for the active zone set. Refer to
"Devices Data Window" on page 3-15
information about the Devices and Switch data windows.
59097-00 A
Open a new fabric through the replacement switch.
Open the faceplate display for the replacement switch. Open the
Switch menu and select Restore.
In the Restore dialog, enter the archive file from the failed switch or
browse for the file.
Click the Restore button.
Displaying Fabric Information
and "Switch Data Window" on page 4-8
3 – Managing Fabrics
for
3-9