Qlogic SANbox 5602 User Manual page 149

0
To modify the graph options, do the following:
1. Choose the units for the graph:
2. Choose what data type to plot. For example, if you selected Show Frames
Data on Graph in step 1., you can plot one or all of the following:
In addition to these, you can also plot total errors by selecting the Total
Errors check box.
3. Display or hide the unit grid. Select the Display Grid on Graph check box to
display the unit grid.
4. Choose the color scheme for the graph. Click a Select Color button to open
its corresponding Select Color dialog, which allows you to select a new color
scheme. You can select the color for each data type, the unit grid, and the
background by clicking the corresponding color field or button. In each case,
you can choose a color using the Swatches, Red-Green-Blue (RGB), or
Hue-Saturation-Brightness (HSB) method.
Note:
5. In the Default Graph Options dialog, click the corresponding radio button to
apply changes to all graphs, the currently selected graph, or all new graphs.
6. In the Default Graph Options dialog, click the OK button to save the color
scheme changes and close the dialog.
59097-00 A
Select the Show Bytes Data on Graph check box to plot data in
KBytes/second
Select the Show Frames Data on Graph check box to plot data in
frames/second.
Total frames transmitted and received (Total Frames)
Total frames transmitted (Total Tx Frames)
Total frames received (Total Rx Frames)
Clicking the Reset button in the Swatches, HSB, and RGB tab
pages of the Select Color dialogs will reset the colors in the
Preview area to the last saved color scheme. At this point you
are only selecting a new color scheme to be saved.
Swatches – Click the Swatches tab. Select a swatch from the palette.
HSB – Click the HSB tab. Select a color using the following methods:
Click in the color palette.
Select the H, S, or B button and use the slide to vary the value.
Enter values in the H, S, or B input fields.
RGB – Click the RGB tab. Select a color by moving the slides to adjust
the values for red, blue, and green; or enter values in the input fields.
5 – Managing Ports
Graphing Port Performance
5-25