Displaying Port Operational States; Displaying Port Speeds - Qlogic SANbox 5602 User Manual

0
5.1.1.2

Displaying Port Operational States

To display the operational state on each port in the faceplate display, open the
View menu and select View Port States.
states and their meanings. The port operational state refers to actual port state
and not the administrative state you may have assigned.
State
On
Ia
Iso
Off
Dia
Dn
5.1.1.3

Displaying Port Speeds

To display the speed of each port in the faceplate display, open the View menu
and select View Port Speeds.
State
Au
1G
2G
4G
10G
59097-00 A
Table 5-2. Port Operational States
Online – port is active and ready to send data.
Inactive – port operational state is offline, but administrative state is
online.
Isolated – E_Port has lost its connection. Refer to
Data Window" on page 5-8
isolated.
Offline – port is active, can receive signal, but cannot accept a device
login.
Diagnostics – port is in diagnostics mode in preparation for testing
Down – the port is disabled, power is removed from the lasers, and
can't be logged in.
Table 5-3
Table 5-3. Port Speeds
Auto-detect
1-Gbps transmission speed
2-Gbps transmission speed
4-Gbps transmission speed (available only with a port license key)
10-Gbps transmission speed
Displaying Port Information
Table 5-2 lists the possible operational
Description
"Port Information
for information about why the E_Port has
lists the possible port speeds.
Description
5 – Managing Ports
5-3