Qlogic SANbox 5602 User Manual page 98

4 – Managing Switches
Displaying Switch Information
Security Fabric Binding
Enable
Temperature
Fan 1 Status
Fan 2 Status
Fan 3 Status
Power Supply 1 Status
Power Supply 2 Status
Beacon Status
Broadcast Support
In-band Enabled
Temperature Failure Port
Shutdown
Warning Temperature
Failure Temperature
NTP Client Enabled
NTP Server Address
FDMI HBA Entry Limit
FDMI Enable
4-10
Table 4-2. Switch Data Window Entries (Continued)
Entry
N/A - does not apply to this switch
Internal switch temperature °C
The status of Fan 1
The status of Fan 2
N/A - does not apply to this switch
Power supply 1 status
Power supply 2 status
Beacon status. Switch LEDs are blinking (On) or not (off).
Broadcast support status. Broadcast support is enabled or
disabled (default).
In-band management status. Permits (True) or prevents
(False) a switch from being managed over an ISL.
Non-configurable (always enabled for this switch). All
ports are downed when the switch temperature exceeds
the Failure Temperature.
Non-configurable temperature threshold (65° Celsius)
above which a warning condition alarm is generated.
Non-configurable temperature threshold (70° Celsius)
above which a failure condition alarm is generated.
Enabled or disabled. Allows for switches to synchronize
their time a centralized server.
The IP address of the centralized NTP server. Ethernet
connection to NTP server is required.
Maximum number of HBAs that can be registered with a
switch.
Fabric Device Management Interface status. If enabled,
device information can be obtained, managed, and saved
through the fabric using Name Service Management
Server functions. SANsurfer Switch Manager will report
any and all FDMI information reported by the entry switch,
if FDMI is enabled on the entry switch. Refer to
"Displaying Detailed Device Information" on page 3-17
information about displaying FDMI information.
Description
0
for
59097-00 A