Snmp Configuration; Snmp Configuration Parameters - Qlogic SANbox 5602 User Manual

4 – Managing Switches
Configuring a Switch
4.7.4.1

SNMP Configuration

The SNMP configuration defines how authentication traps are
describes the SNMP configuration parameters. The illegal characters for the
user-defined fields are the pound sign (#), semi-colon (;), and comma (,).
Parameter
SNMP Enabled
Contact
Read
Community
Trap Community Trap community password (up to 32 characters) that authorizes an
SNMP Proxy
Location
Authentication
Trap
Write
Community
4-26
Table 4-7. SNMP Configuration Parameters
Enables or disables SNMP communication with other switches in the
fabric.
Specifies the name (up to 64 characters) of the person who is to be
contacted to respond to trap events. The default is "undefined".
Read community password (up to 32 characters) that authorizes an
SNMP agent to read information from the switch. This is a write-only
field. The value on the switch and the SNMP management server
must be the same. The default is "public".
SNMP agent to receive traps. This is a write-only field. The value on
the switch and the SNMP management server must be the same.
The default is "public".
If enabled, you can use SNMP to monitor and configure any switch in
the fabric.
Specifies the name (up to 64 characters) for the switch location. The
default is "undefined".
Enables or disables the reporting of SNMP authentication failures. If
enabled, a notification trap is sent when incorrect community string
values are used. The default value is "False".
Write community password (up to 32 characters) that authorizes an
SNMP agent to write information to the switch. This is a write-only
field. The value on the switch and the SNMP management server
must be the same. The default is "private".
managed.Table 4-7
Description
0
59097-00 A