Restore Dialogs – Full And Selective - Qlogic SANbox 5602 User Manual

0
2. Open the Switch menu in the faceplate display and select Restore to display
the Restore dialog shown in
Restore and a Selective Restore tab.
Figure 4-12. Restore Dialogs – Full and Selective
3. Enter the archive file name or browse for the file. This archive file must be
one that was produced by the SANsurfer Switch Manager Archive function.
Configuration backup files created with the Config Backup command are not
compatible with the SANsurfer Switch Manager Restore function.
4. To restore all configuration settings, click the Full Restore tab, then click the
Restore button. To restore selected configuration settings, click the
Selective Restore tab and check one or more of the following boxes, then
click the Restore button:
59097-00 A
Network Properties: Restores all settings presented in the Network
properties dialog except the IP address. Refer to
on page 4-22.
IP Address: Restores switch IP address in addition to the other
network properties.
Switch Properties: Restores all settings presented in the Switch
properties dialog except the domain ID. Refer to
page 4-17.
Domain ID: Restores switch domain ID in addition to the other switch
properties.
Figure 4-12. The Restore dialog offers a Full
4 – Managing Switches
Restoring a Switch
"Network Properties"
"Switch Properties" on
4-29