Sansurfer Switch Manager - Qlogic SANbox 5602 User Manual

2 – Using SANsurfer Switch Manager
Installing the Management Application
2.1.1

SANsurfer Switch Manager

You can install SANsurfer Switch Manager on a Windows, Linux, or Solaris
workstation. To install SANsurfer Switch Manager from the SANsurfer Switch
Manager disk, close all programs currently running, and insert the SANsurfer
Switch Manager Installation Disk into the management workstation CD-ROM
drive.
For a Windows workstation:
1. Using Windows Explorer, double-click the drive letter which contains the
SANsurfer Switch Manager Installation Disk.
2. Double click the Switch_Manager folder, then double click the Windows
folder.
3. Double click the executable file and follow the SANsurfer Switch Manager
installation instructions.
For a Linux workstation:
1. If a file browser does not open, double-click the CD-ROM icon to open the
browser. Double click the Switch_Manager folder, then double click the
Linux folder. If there is no CD-ROM icon, do the following:
a.
b.
c.
2. Enter the following command to make the install file executable:
3. Execute the install program and follow the installation instructions:
For a Solaris workstation:
1. Open a terminal window. If the disk isn't already mounted, enter the
following command:
2. Move to the directory on the disk that contains the executable. Enter the
following command:
2-2
Open an xterm or other terminal window.
Mount the CD-ROM. From a shell prompt, enter the following
command:
mount /mnt/cdrom
Change directory to location of the install program:
cd /mnt/cdrom/Switch_Manager/Linux
chmod +x Linux_4.02.xx_xxxx.bin
./Linux_4.02.xx_xxxx.bin
volcheck
cd /cdrom/cdrom0/Switch_Manager/solaris
0
59097-00 A