Qlogic SANbox 5602 User Manual page 133

0
E Port Isolation Reason
MFS Mode
I/O Stream Guard
Administrative Port Speed
Operational Port Speed
Max Credits
Device Scan
Symbolic Name
Ext Credits Requested
Credits to Donate
Donor Group
Valid Donor Groups
Media
Media Speed
Media Type
Media Transmitter
Media Distance
Media Vendor
Media Vendor ID
59097-00 A
Table 5-6. Port Information Data Window Entries (Continued)
Entry
5 – Managing Ports
Displaying Port Information
Description
Why E_Port is isolated.
Multiple Frame Sequence bundling status.
RSCN message suppression status.
Status can be enabled, disabled, or
automatically determined by the switch.
The speed requested by the user.
The speed actually being used by the port.
The maximum number of credits granted
to a port that can be used when extending
port credits.
Device scan status. Enabled means the
switch queries the connected device
during login for FC-4 descriptor
information.
Port symbolic name
Number of requested credits
The number of credits available to be
donated by the selected port.
The donor group of the selected port.
The number of separate groups within
which extended credits may be donated
and assigned.
The transceiver type. The 10-Gbps ports
always display "unknown", if attached.
The maximum transceiver speed
The transceiver fibre type, such as single
mode, multi-mode, copper.
The transceiver transmitter type, such as
longwave, shortwave, electrical.
The maximum transceiver transmission
distance
The company that manufactured the SFP
The IEEE registered company ID
5-9