Renaming A Zone Or A Zone Set; Removing A Zone Member; Removing A Zone From A Zone Set; Removing A Zone From All Zone Sets - Qlogic SANbox 5602 User Manual

0
3.6.5.3

Renaming a Zone or a Zone Set

To rename a zone, do the following:
1. In the Zone Sets tree of the Edit Zoning dialog, click the zone/zone set to be
renamed.
2. Open the Edit menu and select Rename.
3. In the Rename Zone/Rename Zone Set dialog, enter a new name for the
zone/zone set.
4. Click the OK button.
3.6.5.4

Removing a Zone Member

Removing a zone member will affect every zone and zone set in which that zone
is a member. To remove a member from a zone:
1. In the Edit Zoning dialog, select the zone member to be removed.
2. Open the Edit menu and select Remove.
3. Click the OK button to save changes and close the Edit Zoning dialog.
3.6.5.5

Removing a Zone from a Zone Set

The orphan zone set is created by the application automatically to hold the zones
which are not in any set. The orphan zone set can't be removed and is not saved
on the switch. To remove a zone from a zone set, do the following:
1. In the Edit Zoning dialog, select the zone to be removed. The selected zone
will be removed from that zone set only.
2. Open the Edit menu and select Remove.
3. Click the OK button to save changes and close the Edit Zoning dialog.
3.6.5.6

Removing a Zone from All Zone Sets

To remove a zone from all zone sets, do the following:
1. In the Edit Zoning dialog, select the zone to be removed.
2. Open the Edit menu and select Remove Zone from All Sets.
3. Click the OK button to save changes and close the Edit Zoning dialog.
59097-00 A
3 – Managing Fabrics
Zoning a Fabric
3-35