Removing A Zone Set; Managing Zones - Qlogic SANbox 5602 User Manual

3 – Managing Fabrics
Zoning a Fabric
3.6.4.5

Removing a Zone Set

Removing a zone set from the database affects the member zones in the following
ways.
Member zones that are members of other zone sets are not affected.
The orphan zone set is created by the application automatically to hold the
zones which are not in any set. The orphan zone set can't be removed and
is not saved on the switch.
To delete a zone set from the database, do the following:
1. In the faceplate display, open the Zoning menu and select Edit Zoning to
open the Edit Zoning dialog.
2. In the Zone Sets tree, select the zone set to be removed.
3. Open the Edit menu, and select Remove to remove the zone set.
4. Click the Apply button to save changes to the zoning database.
Alternatively, you may use shortcut menus to remove a zone set from the
database. However, the orphan zone set can not be removed.
3.6.5

Managing Zones

Managing zones involves the following:
Creating a Zone in a Zone Set
Adding Zone Members
Renaming a Zone or a Zone Set
Removing a Zone Member
Removing a Zone from a Zone Set
Removing a Zone from All Zone Sets
Changing Zone Types
Note:
3-32
Changes that you make to the zoning database are limited to the
managed switch and do not propagate to the rest of the fabric. To
distribute changes to configured zone sets fabric wide, you must edit
the zoning databases on the individual switches.
0
59097-00 A