Exiting Sansurfer Switch Manager; Save Default Fabric View File Dialog - Qlogic SANbox 5602 User Manual

0
2.3

Exiting SANsurfer Switch Manager

To exit a SANsurfer Switch Manager application session, open the File menu and
select Exit. If you have not yet defined an encryption key, the Save Default Fabric
View File dialog, shown in
as the default fabric view file. Enter an encryption key in the Default Fabric File
Encryption Key field. Re-enter the encryption key in the Re-enter Encryption Key
to Confirm field. Click the OK button to save the current set of fabrics to the
default fabric view file in the working directory.
Figure 2-3. Save Default Fabric View File Dialog
The encryption key is used to encrypt the sensitive data in the default fabric view
file. Refer to
page 2-14
has been defined and the View File Auto Save and Load preferences settings are
set to Enable, the current fabric view is automatically saved to your default fabric
view file upon exit future SANsurfer Switch Manager sessions.
To prevent SANsurfer Switch Manager from prompting you to save the default
fabric view file between SANsurfer Switch Manager sessions, set the View File
Auto Save and Load preferences setting to Enable (default). Refer to
SANsurfer Switch Manager Preferences" on page 2-15
59097-00 A
Figure
"Changing the Encryption Key for the Default Fabric View File" on
for information about changing this encryption key. If an encryption key
2 – Using SANsurfer Switch Manager
Exiting SANsurfer Switch Manager
2-3, prompts you to save the current fabric view
"Setting
for more information.
2-11