Vim1-Summitstack Versatile Interface Module; Vim1-10G8X Versatile Interface Module - Extreme Networks Summit X150 Series Installation Manual

VIM1-SummitStack Versatile Interface Module

The VIM1-SummitStack versatile interface module
optical modules. These ports (numbered 25 through 28) function the same as the front-panel ports. The
VIM1-SummitStack supports 1000-BASE SFPs. For a complete list of supported SFPs, refer to the most
recent version of the ExtremeEXOS release notes.
The VIM1-SummitStack also provides two high-performance stacking ports that allow you to combine
multiple units into a single SummitStack management entity. The VIM1-SummitStack is the default
VIM1 module shipped with the base Summit X650 platform. Ports 23 and 24 of the front panel are
shared with the two rear-panel stacking ports on the VIM1-SummitStack module.
By default, stacking is not enabled, and all 24 front panel ports are available. When stacking is enabled,
you have access to 22 10GBASE ports and 2 stacking ports. For more information about configuring and
operating a SummitStack configuration, refer to the ExtremeXOS Concepts Guide and the ExtremeXOS
Command Reference Guide.
Figure 51: VIM1-SummitStack Versatile Interface Module
SFP ports
LEDs Stacking ports

VIM1-10G8X Versatile Interface Module

The VIM1-10G8X versatile interface module
optical modules. For information about the supported optical modules, refer to the most recent version
of the ExtremeXOS release notes.
The VIM1-10G8X also provides two high-performance stacking ports that allow you to combine
multiple units into a single SummitStack management entity. The stacking ports on the VIM1-10G8X
module are not shared with the front panel ports.
Figure 52: VIM1-10G8X Versatile Interface Module
SFP/SFP+ ports
25 26 27 28
25 27
26 28
30 31
30 32
29 30 31 32
LEDs
ExtremeXOS Summit Family Switches Hardware Installation Guide
(Figure 51) provides four cages for installed SFP
SH_086
(Figure 52) provides eight cages for installed SFP or SFP+
Stacking ports
SH_087
61