Initializing The Print Server - Epson C823781 - Net Print Server Administrator's Manual

Initializing the Print Server

To initialize your print server, follow the steps below.
1. Make sure that the printer with the print server is turned off.
2. While holding down the status sheet button, turn the printer
on.
3. Hold down the status sheet button for about twenty seconds.
The length of time necessary to hold down the status sheet
button varies depending on the printer model. The red Status
light and green Data light both turn on, indicating the print
server is being initialized.
4. After the initialization is complete, press the status sheet
button to print a status sheet. Check the information on the
status sheet.
Note:
You can also initialize the print server using EpsonNet WinAssist,
MacAssist, or WebAssist by clicking the Return to Default button.
Troubleshooting
12
12
12
12
12
12
12
12
12
12
12
12
229