Initializing The Network Interface; Restrictions On Epson Status Monitor; For The Laser Printer - Epson EpsonNet 10/100 Base Tx Int. 5e Manual

Initializing the Network Interface

To initialize your network interface, turn on the device. Then,
while both the status light and the data light are off, hold down
the status sheet button of the network interface for twenty
seconds. The length of time necessary to hold down the status
sheet button varies depending on the device model. The green
light flashes and the green data light turns on, indicating the
network interface is being initialized.
After the initialization is complete, press the status sheet button
to print a status sheet. Check the information on the status sheet.
Note:
You can also initialize the network interface using EpsonNet Config by
clicking the Default Settings button.

Restrictions on EPSON Status Monitor

The operation of EPSON Status Monitor is different, depending
on whether the printer or all-in-one is connected to the network
interface for use in the wireless LAN environment or to the
computer directly, as described below.

For the laser printer

For Windows XP Service Pack 2 Users
If you share the laser printers on the computer running Windows
XP Service Pack 2 on the network, client computers with the
following conditions cannot monitor the printers using EPSON
Status Monitor:
❏ Client computers running Windows Me/98/95
Chapter 4 Problem Solver 212