Table of Contents
Advertisement
Status lights
The network adapter has two status lights that indicate the
current operating status of the network adapter when you first
turn on the printer, during normal operation, and when errors
occur. The Status light has two-colors, red and green, and when
both colors are on produces orange. The Data light is a green light.
The status lights indicate the following:
Status light
Green
Green
Orange
Orange
Red
Red Flashing
Red and Green flashing alternately
Status sheet button
The first time you use the network adapter after installing or
reinstalling it, turn on the printer while holding down the status
sheet button and keep to hold down it about twenty seconds to
initialize the network adapter. The length of time necessary to
hold down the status sheet button varies depending on the printer
model. See your user's guide for more information.
Before you start configuring the network adapter, be sure to press
and hold the status sheet button on the network adapter to print
a status sheet. A status sheet shows important information such
as the current configuration, the serial number, and the MAC
address. You will need this information to configure the network
adapter.
Data light
On
Flashing
On
Flashing
On
On
Status
10M link
10M receiving packets
100M link
100M receiving packets
Initializing
Error status
Firmware update mode
Getting Started
1-2
Advertisement
Table of Contents
