Selecting A Printer To Monitor - Epson C82362 Administrator's Manual

Note for Win 98/95:
The screen shown below does not appear in Windows 98/95.
9. Check the current settings and click Next. The installation
program will start installing the necessary files. Follow the
on-screen instructions.
10. When the Setup Complete dialog appears, select Yes and click
Finish to restart Windows.

Selecting a Printer to Monitor

Before monitoring a LPR printer with EPSON Status Monitor 2,
you need to select the printer in your operating system. Follow
the steps for your operating system: Windows 95/98, "Setting Up
Your Printer" on page 10-3; Windows 2000, "Printing via
Standard TCP/IP Port Monitor in Windows 2000" on page 6-2;
NT 4.0, "Printing via LPR port in Windows NT 4.0" on page 6-5;
and NT 3.51, "Printing via LPR port in Windows NT 3.51" on page
6-6.
Note:
The interface card's IP address must be set; otherwise the printer does
not appear on the screen. For instructions on installing the card, see your
printer's documentation. For instructions on setting the IP address for
the card, see Chapter 2.
11-10
EPSON Status Monitor 2 (Windows only)