•
Specify the following setting in the /etc/syslog.conf file:
local0.info /usr/local/audlog
•
Use the HDLM command's set operation to specify local0 for the audit
log facility:
You can also filter the audit log output by specifying a severity level and type
for the HDLM command's set operation.
Filtering by severity:
The following table lists the severity levels that can be specified.
Severity
Filtering by category:
The following categories can be specified:
¢
¢
¢
¢
For details on how to specify audit log settings, see
Functions on page
Audit Log Data Formats
The following describes the format of audit log data:
Format of audit log data output to syslog:
¢
¢
¢
¢
2-38
Table 2-11 Severity Levels That Can Be Specified
Audit log data to output
0 None
1
2 Critical
3 Critical and Error
4 Critical, Error, and Warning
5
6 Critical, Error, Warning, and Informational
7
StartStop
Authentication
ConfigurationAccess
All of the above
3-69.
priority
date-and-time
host-name
program-name
HDLM Functions
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Correspondence with syslog
severity levels
Emergency
Alert
Critical
Error
Warning
Notice
Informational
Debug
Setting Up the HDLM