When A User Changes The Intermittent Error Information - Hitachi XP P9500 User Manual

Figure 2-12 What Will Happen When Conditions Are Changed During Error

When a User Changes the Intermittent Error Information

The following might be reset when a user changes any of the values set for
the intermittent error or the path status: the number of errors that have
already been counted during error monitoring, the amount of time that has
passed since error monitoring has started, and the information about whether
an intermittent error has occurred.
Changing the Intermittent Error Information on page 2-26
above items are reset.
If you want to check whether intermittent error monitoring is being
performed for the path, check the IEP item displayed when the dlnkmgr
command's view -path operation is executed with the -iem parameter. If a
numerical value of 0 or greater is displayed in the Intermittent Error Path
item, then intermittent error monitoring is being performed.
Table 2-6 When Effects of a User Changing the Intermittent Error
Changing the
intermittent error
monitoring settings
2-26
User operation
Turning off
Changing the conditions for
an intermittent error while
intermittent error
monitoring is being
performed
Turning intermittent error
monitoring on by executing
HDLM Functions
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Monitoring
Table 2-6 When Effects of a User
Information
Number of
errors and time
passed since
error
monitoring
started
Reset
#2
Reset
lists whether the
Information
about paths
not subject to
automatic
failback
#1
Reset
Inherited