Hitachi XP P9500 User Manual page 425

HDLM version 5.8.1 or earlier provided an rc.shutdown file in order to
avoid having physical volumes already defined when a host is started.
Because this situation does not occur in HDLM version 5.9 or later, the
rc.shutdown file is no longer provided. For this reason, the manual has
been changed as follows:
The portion of the procedure related to the rc.shutdown file has been
¢
deleted from the explanation of uninstalling HDLM.
The rc.shutdown file has been deleted from the files collected by the
¢
DLMgetras utility for collecting HDLM error information.
• The content displayed for HDevName in the HDLM view command
operation has been changed from the HDLM device (dlmfdrvn) to hdisk.
Accompanying this change, Device for displaying hdisk name when view
-lu or view -drv is executed in HDLM version 5.8.1 or earlier has been
removed.
• Because dlmfdrv was deleted, the following HDLM utilities are no longer
provided and the descriptions related to them have been deleted from the
manual:
Utilities for operating HDLM volume groups
¢
HDLM version 5.9 or later uses standard AIX commands that
correspond to the commands for utilities for operating HDLM volume
groups. Table
volume groups, and corresponding AIX commands on page B-3
the correspondence between the commands for operating utilities for
HDLM volume groups and the standard AIX commands.
Table B-1 Commands of the utilities for operating HDLM volume
Commands of the utilities for
operating HDLM volume groups
dlmchvg
dlmexportvg
dlmextendvg
dlmimportvg
dlmlistvgbackup
dlmlsvg
dlmmirrorvg
dlmmkvg
dlmrecreatevg
dlmreducevg
dlmreorgvg
dlmrestorevgfiles
Differences Between HDLM Version 5.9 or Later and Version 5.8.1 or Earlier
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Table B-1 Commands of the utilities for operating HDLM
groups, and corresponding AIX commands
Corresponding AIX commands
chvg
exportvg
extendvg
importvg
listvgbackup
lsvg
mirrorvg
mkvg
recreatevg
reducevg
reorgvg
restorevgfiles
lists
B-3