Hitachi XP P9500 User Manual page 417
Hitachi dynamic link manager software user guide for aix (6.6) (t5208-96012, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (188 pages) ,
- User manual (640 pages)
Table of Contents
Advertisement
Message ID
1026
1027
1033
1034
1035
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Refresh the host information, and then perform the
operation again. If the same error occurs again, execute the
DLMgetras utility for collecting HDLM error information, and
then contact your HDLM vendor or maintenance company if
you have a maintenance contract for HDLM. For details on
the DLMgetras utility, see
HDLM Error Information on page
Details
The acquisition of path information has been aborted,
because the path configuration was changed while the
system was attempting to acquire the path information.
Action
Refresh the host information, check the path status, and
then perform the operation again.
Details
The error monitoring interval and the number of times that
the error needs to occur are conflicting with the automatic
failback-checking interval.
Action
Set the intermittent error-monitoring interval to a value that
is equal to or greater than (automatic- failback-checking-
interval x number-of-times-error-is-to-occur-for-
intermittent-error-monitoring).
Details
An attempt to acquire the HDLM version information failed.
Action
Re-execute the command. If the same error occurs again,
execute the DLMgetras utility for collecting HDLM error
information, and then contact your HDLM vendor or
maintenance company if there is a maintenance contract for
HDLM. For details on the DLMgetras utility, see
Utility for Collecting HDLM Error Information on page
Details
An attempt to acquire information about the HDLM version
or SP version has failed.
Action
Re-execute the command. If the same error occurs again,
execute the DLMgetras utility for collecting HDLM error
information, and then contact your HDLM vendor or
maintenance company if there is a maintenance contract for
HDLM. For details on the DLMgetras utility, see
Utility for Collecting HDLM Error Information on page
Details
An attempt to acquire information about the HDLM version
or SP version has failed.
Action
Re-execute the command. If the same error occurs again,
execute the DLMgetras utility for collecting HDLM error
Messages
Explanation
DLMgetras Utility for Collecting
7-4.
DLMgetras
7-4.
DLMgetras
7-4.
8-115
Advertisement
Table of Contents
