Hitachi XP P9500 User Manual page 410

Message ID
KAPL13107-I The user stopped the operation.
KAPL13108-
E
KAPL13109-
W
8-108
Message Text
An internal error occurred in the
dlmpreuninst utility. Error Code =
aa...aa, bb...bb Execute the DLMgetras
utility to collect error information, and
then contact your vendor or maintenance
company. Refer to the HDLM User's
Guide for instructions how to execute the
DLMgetras utility.
A parameter is invalid. parameter =
aa...aa
Messages
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Explanation
an invalid response was
sent three times
consecutively to a request.
Action
To execute dlmpreuninst
again, enter either y or n.
Details
The dlmpreuninst utility
has been terminated
because n was sent to a
request.
Action
None.
Details
A system-based error, not
caused by the user,
occurred during
dlmpreuninst utility
processing.
aa...aa: The error number
which specifies the
performed processing
(decimal number)
bb...bb: Return value of
the executed processing
(decimal number)
Action
Contact your HDLM vendor
or the maintenance
company if there is a
maintenance contract for
HDLM.
Details
An invalid parameter is
specified.
aa...aa: The specified
parameter (character
string)
Action
With the -h parameter
specified, execute the
HDLM pre-uninstallation
utility (dlmpreuninst).
Make sure that the
parameters that should be
specified are correct, and
then re-execute. For
details about the
dlmpreuninst utility, see
dlmpreuninst Utility for