Hitachi XP P9500 User Manual page 398

Message
ID
KAPL10649-
E
KAPL10650-
I
KAPL10651-
I
KAPL10652-
E
8-96
Message Text
aa...aa: An attempt to perform
Reservation Key clear processing has
failed. Make sure that an error has not
occurred in the HDLM-management target
device, and that the device can be
managed by HDLM. If either of the above
conditions are not met, execute the
DLMgetras utility to collect error
information, and then contact your
vendor or maintenance company. Refer to
the HDLM User's Guide for instructions
how to execute the DLMgetras utility.
aa...aa: NO RESERVATION
The user terminated the operation.
The entered value is invalid. The
operation stops.
Messages
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Explanation
your HDLM vendor or the
maintenance company if
there is a maintenance
contract for HDLM.
If a message with Error
Code = 36 is output, check
for a path error. If there is
a path error, restore the
path status and then retry.
If the KAPL10648-E
message has been issued
but there is no path error,
contact your HDLM vendor
or the maintenance
company if there is a
maintenance contract for
HDLM.
Details
An attempt to perform
Reservation Key clear
processing has failed.
aa...aa: Hdisk name
Action
Make sure that an error
has not occurred in the
HDLM-management target
device, and that the device
can be managed by HDLM.
If either of the above
conditions are not met,
contact your HDLM vendor
or the maintenance
company if there is a
maintenance contract for
HDLM.
Details
A LU has not been
reserved.
aa...aa: Hdisk name
Action
None.
Details
The dlmpr utility has been
terminated because n was
sent to a request.
Action
None.
Details