Hitachi XP P9500 User Manual page 389

Message
ID
KAPL10553- Too many parameters have been
W specified.
KAPL10554- A parameter is invalid. parameter =
W aa...aa
KAPL10555- Executing the dlmpostrestore utility will
I reboot the host. Is this OK? [y/n] :
KAPL10556- The entered value is invalid. Re-enter. [y/
W n]:
KAPL10557- The user stopped the operation.
I
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Message Text
Messages
Explanation
Action
To execute dlmpostrestore
utility, enter y.
If you do not want to
execute dlmpostrestore
utility, enter n.
Action
With the -h parameter
specified, execute the
dlmpostrestore utility.
Make sure that the format
of the utility is correct, and
then re-execute it.
Details
An invalid parameter is
specified.
aa...aa: The specified
parameter
Action
With the -h parameter
specified, execute the
dlmpostrestore utility.
Make sure that the format
of the utility is correct, and
then re-execute it.
Details
Executing the
dlmpostrestore utility will
reboot the host.
Action
To execute
dlmpostrestore utility,
enter y.
If you do not want to
execute dlmpostrestore
utility, enter n.
Details
A value other than y or n
has been entered for a [y/
n] request.
Action
Enter either y or n.
Details
The dlmpostrestore utility
has been terminated
8-87