Hitachi XP P9500 User Manual page 323

Message
ID
KAPL01084- An attempt to delete the license key file
W has failed. File name = aa...aa
KAPL01088- The specified parameter values cannot be
W specified at the same time. Operation
name = aa...aa, parameter = bb...bb,
parameter values = cc...cc
KAPL01089- One of the following was executed at the
E same time as an HDLM command set -lic
operation: another set -lic operation, or
an update of the license for an update
installation.
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Message Text
Messages
Explanation
aa...aa: /var/tmp/
hdlm_license
Action
When the message that
prompts you to enter the
license key is displayed,
enter the license key.
Alternatively, cancel the
HDLM command, save the
correct license key file in
the designated directory,
and then re-execute the
HDLM command.
aa...aa: /var/tmp/
hdlm_license
Details
aa...aa: /var/tmp/
hdlm_license
Action
If a license key file exists,
delete it.
aa...aa: /var/tmp/
hdlm_license
Details
aa...aa:view
bb...bb: Parameter name
cc...cc: Parameter values
that cannot be specified at
the same time
Action
Execute help operation-
name of the HDLM
command (dlnkmgr) to
check which parameter can
be specified, and then
retry. For details on the
help operation, see
(Displays the Operation
Format) on page 6-4.
Action
Check the license by using
the HDLM command's view
-sys -lic operation. If
necessary, re-execute the
HDLM command's set -
lic operation. If the same
error message is output
again, contact your HDLM
vendor or the maintenance
help
8-21