Hitachi XP P9500 User Manual page 294

Optional: If a key and its setting are not specified, one of the following
values will be used:
¢
¢
#1
Enter one key and one setting per line.
#2
If the value is not of an allowable type, an error will occur.
[ODM_SETTINGS] section
Defines information used when the dlmodmset utility is executed. This section
is optional. If this section name is omitted, or if any of the keys in the section
are not defined, setup by means of the dlmodmset utility will not be executed.
For details about the dlmodmset utility, see
HDLM Execution Environment ODM on page
Table 7-7 Keys in the [ODM_SETTINGS] Section on page 7-30
defined in the [ODM_SETTINGS] section.
Key name
odm_lun_reset
odm_online_e_io_blo
ck
odm_npiv_option
7-30
For a new installation:
The default value will be used.
For an upgrade installation or re-installation:
The previous setting will be inherited.
Table 7-7 Keys in the [ODM_SETTINGS] Section
#1
Specify one of the following
values to indicate whether to
enable or disable the LUN
RESET option:
on: Enabled
off: Disabled (default)
Specify one of the following
values to indicate whether to
enable or disable suppression of
I/O access on the Online(E)
status path:
on: Enabled
off: Disabled (default)
Specify one of the following
values to indicate whether to
Utility Reference
Hitachi Dynamic Link Manager User Guide (for AIX(R))
dlmodmset Utility for Setting the
7-20.
#2
Description
lists the keys
Necessity of
definition
Upgrade
number
New installatio
installa n or re-
charact
tion installatio
n
Optional Optional 3
Optional Optional 3
Optional Optional 3
Maxim
um
of
ers