Adjusting The Number Of Messages To Be Output Per Monitoring Interval - Hitachi XP P9500 User Manual
Hitachi dynamic link manager software user guide for aix (6.6) (t5208-96012, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (422 pages) ,
- User manual (574 pages)
Table of Contents
Advertisement
The specifiable range is between 1 second and 300 seconds, with a
default of 10. We recommend setting a value of 5 when collecting an
integrated trace.
To leave the monitoring interval as is, leave New Span (sec) blank,
enter ! and press the Enter key. You will be returned to the Hitachi
Network Objectplaza Trace Library setup menu.
6
Press the Enter key.
.
The new setting is applied and the Hitachi Network Objectplaza Trace
Library setup menu appears again.
Adjusting the Number of Messages to be Output Per Monitoring
Interval
This section explains how to adjust the number of messages output to fit a
particular monitoring interval.
To adjust the number of messages to be output per monitoring
interval:
1
In the Hitachi Network Objectplaza Trace Library setup menu, type 6 and
.
then press the Enter key.
A screen to set the monitoring interval for the amount of messages
output to the integrated trace file will appear. The current value is
displayed in Current Span (sec).
2
Enter a desired interval in New Span (sec).
.
The specifiable range is between 0 and 3600 seconds, with a default of 0.
We recommend setting a value of 0.
To leave the monitoring interval as is, leave New Span (sec) blank,
type ! and press the Enter key. You will be returned to the Hitachi
Network Objectplaza Trace Library setup menu.
Note that when you specify a monitoring interval of 0, even if you specify
the maximum number of messages in 7: Max messages per span, the
amount of integrated trace information to be output will not be adjusted.
3
Press the Enter key.
.
The new setting is applied and the Hitachi Network Objectplaza Trace
Library setup menu appears again.
4
In the Hitachi Network Objectplaza Trace Library setup menu, type 7 and
.
press the Enter key.
A screen to set the maximum number of messages output to the
integrated trace file based on the monitoring interval specified in 6:
3-82
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Advertisement
Table of Contents
