Installing Hdlm In A Powerha 7.1 Environment - Hitachi XP P9500 User Manual
Hitachi dynamic link manager software user guide for aix (6.6) (t5208-96012, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (640 pages) ,
- User manual (574 pages)
Table of Contents
Advertisement
Installing HDLM in a PowerHA 7.1 Environment
In a PowerHA 7.1 environment, even if the cluster service is stopped, the
cluster repository disk remains in the used state. Therefore, if you perform a
new installation, upgrade installation, or re-installation of HDLM in an
environment in which PowerHA 7.1 is already in use, perform the procedure
below. For details on how to use and set up PowerHA, see the PowerHA
documentation.
1
Log in to the standby host as the root user.
.
2
Execute the following command on the standby host to stop PowerHA.
.
# smitty cl_stop
3
Execute the following command on the standby host.
.
When the OS used in a PowerHA 7.1 environment is AIX V6.1 TL06 or AIX
V7.1 with no TL:
When the OS used in a PowerHA 7.1 environment is AIX V6.1 TL07 or
later or AIX V7.1 TL01 or later:
4
Perform a new installation, upgrade installation, or re-installation of HDLM
.
on the standby host.
When performing a new installation of HDLM in a local boot disk
environment:
When performing a new installation of HDLM in a boot disk environment:
When performing an upgrade installation or re-installation of HDLM in a
local boot disk environment:
When performing an upgrade installation or re-installation of HDLM in a
boot disk environment:
5
Execute the following command on the standby host.
.
3-58
# clcmd stopsrc -s clconfd
# clusterconf -fu
# clctrl -stop -m node-name
Perform the procedure described in
Preparations for an Upgrade Installation or Re-installation of HDLM on
page
3-34.
Perform the procedure described in
Management-Target Device on page 3-34
Upgrade Installation or Re-installation of HDLM on page
Perform the procedure described in
Boot Disk Environment on page 3-35
Installation or Re-installation of HDLM on page
Perform the procedure described in
Disk Environment on page 3-42
or Re-installation of HDLM on page
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Stop Applications on page 3-34
Perform Operations for HDLM
of
Preparations for an
When Installing HDLM in a Local
of
Performing an Upgrade
3-35.
When Installing HDLM in a Boot
of
Performing an Upgrade Installation
3-35.
of
3-34.
Advertisement
Table of Contents
