When Installing Hdlm On Alternate Disks - Hitachi XP P9500 User Manual

# cfgmgr
21 Execute the following command in the client logical partition to confirm
.
that the physical volume has been recognized as hdisk.
If the following message is displayed, then the physical volume (hdisk)
was recognized correctly:
# lsdev -Cc disk
hdisk1 Available Virtual SCSI Disk Drive
Table Table 3-12 List of Files Inherited During an Upgrade Installation or Re-
installation on page 3-48
upgrade installation or re-installation of HDLM.
Table 3-12 List of Files Inherited During an Upgrade Installation or Re-
/usr/DynamicLinkManager/config/dlmmgr.xml
/var/DynamicLinkManager/log/dlmmgr[1-16].log
/var/DynamicLinkManager/log/dlminquiry[1-2].log
/usr/DynamicLinkManager/config/dlmwebagent.properties
/var/DynamicLinkManager/log/hdlmtr[1-64].log
/var/DynamicLinkManager/log/dlmconfig[1-2].log
/var/DynamicLinkManager/log/mmap/hdlmtr.mm
/var/DynamicLinkManager/log/dlmwebagent[1-16].log
/var/DynamicLinkManager/log/dlmutil[1-2].log
/var/DynamicLinkManager/log/mmap/dlmutil.mm
/var/DynamicLinkManager/log/installhdlm.log

When Installing HDLM on Alternate Disks

Perform the procedure below if you want to install HDLM on an alternate disk
in a local boot disk environment or a boot disk environment. Only upgrade
installations and re-installations are supported when installing HDLM on
alternate disks.
1 Log in to AIX as a user with root permissions.
.
3-48
lists and describes the files inherited during an
File
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
installation
Description
File for setting up
HDLM functionality
Log files of HDLM
Manager
Log files of HDLM
Inquiry information
Hitachi Command
Suite Common Agent
Component settings
file
Trace files
Configuration log file
Trace management file
Hitachi Command
Suite Common Agent
Component log files
HDLM utility's log file
HDLM utility's log trace
management file
Unattended installation
execution log