Hitachi XP P9500 User Manual page 102

Hitachi dynamic link manager software user guide for aix (6.6) (t5208-96012, november 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

If you execute the dlmrmdev utility without the -e parameter specified at
step 3 or 7 and then the KAPL09048-E message is displayed, the hdisk for
the device that is managed by HDLM still remains.
If you execute the dlmrmdev utility with the -e parameter specified at
step 3 or 7 and then the KAPL09048-E message is displayed, the hdisk for
the device that is managed by HDLM still remains, and its status is
Available. Re-execute the procedure in step 3.
During installation, the KAPL09241-W message might be output. In this
case, installation of HDLM continues, but installation of HDLM components
has failed. After installing HDLM, resolve the problem according to the
KAPL09241-W message if necessary.
13
Execute the following command to make sure that the package is
.
installed.
# lslpp -la DLManager.mpio.rte
Make sure that the fileset item in the output listing contains
DLManager.mpio.rte, and all the displayed statuses are COMMITTED.
If one or more of the displayed statuses are BROKEN, uninstall and then
re-install HDLM.
14
Execute the following command to make sure that the hdisk.
.
# cfgmgr
15
Execute the following command and verify that the status of the hdisks is
.
Available:
# lsdev -Cc disk
hdisk0
hdisk1
hdisk2
hdisk3
hdisk4
...
Make sure that all the displayed HDLM-related devices are Available.
hdisks 0 to 2 are the physical device file names of the host's internal
disks.
hdisk 3 and the following are the logical device file names that correspond
to physical volumes in the storage system.
16
Activate the volume group used by HDLM.
.
# varyonvg volume-group-name
17
Mount the file system used by HDLM.
.
# mount file-system-mount-point
18
Execute the dlnkmgr command's view operation to check the status of
.
each program:
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys
HDLM Version
Service Pack Version
Load Balance
3-40
Available 1S-08-00-8,0
Available 1S-08-00-9,0
Available 1S-08-00-10,0 16 Bit LVD SCSI Disk Drive
Available 1H-08-02
Available 1H-08-02
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
16 Bit LVD SCSI Disk Drive
16 Bit LVD SCSI Disk Drive
Hitachi Disk Array (Fibre)
Hitachi Disk Array (Fibre)
: x.x.x-xx
:
: on(rr)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynamic link manager

Table of Contents